In this article I will share my experiences of removing hardened latex tubeless sealant from a mountain bike tubeless tire with a Powertec Abrasive Cleaning Stick. Personally I prefer to remove that layer of hard latex sealant before I want to add a new cycle of tubeless sealant (or replenisher).
Tubeless
Peaty’s Holeshot Tubeless Puncture Plugger Kit
In this article I will review the Peaty’s Holeshot Tubeless Puncture Plugger Kit, which is packed in the Craft Cadence Essentials Case, but also sits in the saddle bags of both Scott Scale 925 mountain bike and Canyon Grizl CF SL 8 1-by gravel bike. If you are riding tubeless, than a plugger kit is a no-brainer.
Stan’s Race Day Tubeless Sealant review
In this article I will share my experience with the Stan’s Race Day Tubeless Sealant for the Vittoria Mezcal Endurance Gravel tires powered by the Graphene compound. Stans is know for its rims and wheels, and the Stans Race Day sealant is an alternative for the Silca Ultimate Tubeless Sealant.
Muc-Off Tubeless Rim Tape on A-Symmetrical DT Swiss RR411 Road Rim
In this article I will share the use of Muc-Off Tubeless Rim Tape on the a-symmetrical DT Swiss RR411 rim of the FFWD F2A rear wheel that is build around DT Swiss 240s hubs. I’ve purchased the FFWD F2A wheels for a bargain price point. Velox Cotton Textile rim tape and the Schwalbe High Pressure rim tape didn’t do the trick.
Muc-Off Glue & Sealant Remover
In this article I will share my thoughts about Muc-Off Glue & Sealant Remover that I used when I changed the Maxxis Rambler 28″ 40C Tubeless Ready EXO Dual 120 Folding tires that I use during summer for the Vittoria Mezcal Gravel Endurance TLR Graphene 2.0 which are better in wet conditions (and overall a very good performance).
Silca Ultimate Tubeless Sealant and Replenisher
In this article I will review the Silca Ultimate Tubeless Sealant with Fiberfoam Technology and the Silca Ultimate Tubeless Sealant Replenisher. Basically this is 2-step system to keep your tubeless wheels spinning for a year with the least amount of punctures and at lower pressures.
Peaty’s x Chris King MK2 Tubeless Valves
In this article I will share my thoughts about the Peaty’s x Chris King MK2 Tubeless Valves that I run on the Syncros wheels and DT Swiss M1700 spline wheels with Tubeless Ready Vittoria tires on them. I will try to compare for a bit with DT Swiss Tubeless Valve for MTB and some more basic Hutchinson tubeless vales.
DT Swiss Tubeless Ready Rim Tape
In this article I will share my view on the DT Swiss Tubeless Ready Rim tape that I used to replace the stock rim tape on my Scott Scale 925 mountain bike, that was damaged around the valve hole in the Syncros X-25 rim.