cycling-review.net
In this article I will share my thoughts on the Park Tool Emergency Tire Boot TB-2 patches, that have secured a place in the Craft Cadence Essentials Case when riding my Canyon road bike or Scott Scale 925 mountain bike.
On the road I’m riding a normal folding tire, non-disc wheelsystem, while on the mountainbike it is a tubeless ready centerlock disc wheel system.
In this article I will share my thoughts about the Tune Schraubwürger Seatpost Clamp on my Scott Scale 925, that replaced the stock Syncros quick release seatpost clamp.
Tune has always been a high quality German brand for the weightweenies, but here it is the combination of weight, price-point and engineering.
In this article I will review the Shimano Dual Rain Shoe Covers CW-FABW-VS42U that I use in combination with the Sidi Drako 2 SRS Carbon Mountain Bike shoes. I will have a look at some of the design features, that are welcome for off-road use !
In this article I will share my view on the DT Swiss Tubeless Ready Rim tape that I used to replace the stock rim tape on my Scott Scale 925 mountain bike, that was damaged around the valve hole in the Syncros X-25 rim.
In this article I will share some thoughts on the Shimano Brake Pad Spacer with product number Y-8J709000. It is a cheap and simple but must have tool. Not only when travelling, but also when you are riding your indoor trainer.
Downtime of cycling-review.net was experienced in the period 22-08-2023 – 22-09-2023 due to an advanced ransomware attack on the infrastructure of a friend’s webhosting company. I was using their webhosting services for many many years with high satisfaction and good quality.
In this article I will review the Sidi Drako 2 SRS Carbon Matt Mountain Bike shoes, and zoom in on features and details that I really like. I will also explain the similarities with the Sidi Wire SP shoes that I use on my road bike.
In this article I will review the CEMA Bearing Interlock BB86-BB92 Bottom Bracket. I will share my experience from installation, the interlock design and compare it with my C-Bear BB86-BB92 press fit bottom bracket experiences.
Some of my thoughts will cover design, quality, what is in the box and many more angles. In a separate review I will have a deeper look into the CEMA tools for Interlock Bottom brackets.
In this article I will look at the PB Swiss Tools 304.4 hammer and compare it with a normal 500 gram hammer with a Picard nylon cap.
While there is a solid overlap in application options, the PB Swiss Tools 304.4 hammer is basically a 2-in-1 hammer with a dead blow mallet added to the table.